I use virtualbox to install debian 4.0 in my windows system.So I can use linux again.In fact I have never used the system for a long time.It's a good experience this time.Virtualbox is a good open source.Very good.

If you want to make scripts run at boot time with debain.Just following:

Debian uses a Sys-V like init system for executing commands when the system runlevel changes - for example at bootup and shutdown time.

If you wish to add a new service to start when the machine boots you should add the necessary script to the directory /etc/init.d/. Many of the scripts already present in that directory will give you an example of the kind of things that you can do.

Here's a very simple script which is divided into two parts, code which always runs, and code which runs when called with "start" or "stop".

#! /bin/sh # /etc/init.d/blah #  # Some things that run always touch /var/lock/blah  # Carry out specific functions when asked to by the system case "$1" in   start)     echo "Starting script blah "     echo "Could do more here"     ;;   stop)     echo "Stopping script blah"     echo "Could do more here"     ;;   *)     echo "Usage: /etc/init.d/blah {start|stop}"     exit 1     ;; esac  exit 0  

Once you've saved your file into the correct location make sure that it's executable "chmod 755 /etc/init.d/blah.

Then you need to add the appropriate symbolic links to cause the script to be executed when the system goes down, or comes up.

The simplest way of doing this is to use the Debian-specific command update-rc.d:

root@skx:~# update-rc.d blah defaults  Adding system startup for /etc/init.d/blah ...    /etc/rc0.d/K20blah -> ../init.d/blah    /etc/rc1.d/K20blah -> ../init.d/blah    /etc/rc6.d/K20blah -> ../init.d/blah    /etc/rc2.d/S20blah -> ../init.d/blah    /etc/rc3.d/S20blah -> ../init.d/blah    /etc/rc4.d/S20blah -> ../init.d/blah    /etc/rc5.d/S20blah -> ../init.d/blah 

If you wish to remove the script from the startup sequence in the future run:

root@skx:/etc/rc2.d# update-rc.d -f  blah remove update-rc.d: /etc/init.d/blah exists during rc.d purge (continuing)  Removing any system startup links for /etc/init.d/blah ...    /etc/rc0.d/K20blah    /etc/rc1.d/K20blah    /etc/rc2.d/S20blah    /etc/rc3.d/S20blah    /etc/rc4.d/S20blah    /etc/rc5.d/S20blah    /etc/rc6.d/K20blah 

This will leave the script itself in place, just remove the links which cause it to be executed.

You can find more details of this command by running "man update-rc.d".